Low Speed Peristaltic Dispensing Pump
The LP-BT100-1F peristaltic dispensing pump is mainly designed for laboratory use.
This dispensing pump delivers flow rates up to 500 ml/min and dispensing volume ranges from 0.01 ml to 9900 ml.
Combining a 128×32 LCD with a membrane keypad and a rotary encoded switch makes the operation easy and prompt.
The speed can be adjusted manually or automatically through an external control interface.
Specifications
- Speed: 0.1 to 100 rpm, reversible
- Flow rates: 0.2μL to 500 ml/min
- Dispensing volume: 0.01 ml to 9.99 litres
- Copy number: 0 to 9999, "0" means unlimited cycle
- Pause time: 0.1 sec. to 99.9 min, resolution is 0.1 sec.
- Back suction time: 0 to 99.9 sec., resolution is 0.1 sec.
- External control: Start/stop, direction and speed control (0-5V, 0-10V, 4-20 mA and 0-10 kHz control modules are optional)
- Speed signal output: 0-10 kHz corresponding to 0.1-100 rpm
- Start/stop signal output: OC gate signal output
- Direction signal output: OC gate signal output
- Communication interface: RS485
Functions and features
- Micro-flow rates transferring: The smallest flow rate can reach 0.2 μl/min
- Back suction function: In dispensing mode, the pump reverses after finishing one filling operation to prevent the liquid from dripping
- Operating mode: Membrane keypad and rotary encoded switch
- Speed control: The speed can be adjusted manually or automatically through external control interface
- Display: LCD displays current running status
- Prime key: For fast filling and emptying
- Memory function: Storing the running parameters automatically
- Calibration function: The flow rates and the dispensing volume can be calibrated to increase the accuracy
- Communication function: Computer control available through RS485 communication interface
Operating Manual
- Supplied with English operating manual
Parameters
| Drive | Pump head | Tubing size # | Flow rate (ml/min/channel) at 0.1 - 100 rpm (measured with water) | Weight (kg) | |
| LP-BT100-1F | YZ1515X, YZII15 (3 rollers) | 13 | 0.006 - 6.3 | 4.2 | |
| 14 | 0.025 - 25 | ||||
| 19 | 0.042 - 41.66 | ||||
| 16 | 0.077 - 77.7 | ||||
| 25 | 0.16 - 160 | ||||
| 17 | 0.26 - 266 | ||||
| 18 | 0.36 - 366 | ||||
| YZ2515X, YZII25 (3 rollers) | 15 | 0.16 - 160 | |||
| 24 | 0.26 - 266 | ||||
| YZII25 (3 rollers) | 35 | 0.36 - 360 | |||
| 36 | 0.5 - 500 | ||||
| DG-(1, 2, 4) 6 rollers (1, 2, 4 channels) | Tubing with stops WT: 0.8-1.0 mm, ID: ≤ 3.17 mm |
Max.48 | 4 - 4.3 | ||
| DG-(1, 2, 4) 10 rollers (1, 2, 4 channels) | Max. 32 | ||||
| DMD15-13-B | 13 | 0.013 - 13.3 | 4.2 | ||
| 14 | 0.05 - 50 | ||||
| 19 | 0.103 - 103.3 | ||||
| 16 | 0.16 - 160 | ||||
| 25 | 0.35 - 350 | ||||
| DG15-24 (2 channels, 4 rollers) | 16 | 0.082 - 81.7 | 4.6 | ||
| 25 | 0.192 - 191.7 | ||||
| 17 | 0.3 - 300.0 | ||||
| DG15-28 (2 channels, 8 rollers) | 13, 14 WT: 0.8 - 1.0 (mm) ID: ≤ 3.17 mm |
Max. 75 (pr channel) | 4.5 | ||
*WT: Wall thickness, ID: Inner diameter
Note: If you choose a LP-YZ1515x with 6 rollers the flow rate will be 2/3 of the flow rate LP-YZ1515x with 3 rollers.
VIDEOS
Dispensing Demo
Dispensing Calibration
Flow Rate Calibration
Back Suction Demo
| Weight | 3.8 kg |
| CE marking | Yes |
| IP-Rating | IP31 |
| Speed | 0.1-100 rpm |
| Flow rate | 0.2μl - 500 ml/min |
| Power supply | AC90-260V/40W |
| Operating Temperature | 0-40°C |
| Relative humidity | < 80% |
| Size (Length) | 285 mm |
| Size (Height) | 180 mm |
| Size (Width) | 207 mm |
| Caption | Representative image only |
| Title | Type | Size | Download |
|---|---|---|---|
| BT100-1F-RS485-Protocol.pdf | 199.63KB | Download | |
| BT100-1F-operation-manual-2020.pdf | 6.72MB | Download | |
| BT100-1F-slangepumpe-manual-DK.pdf | 967.49KB | Download |
