Medium Flow Rate Peristaltic Dispensing Pump
The LP-BT300-1F dispensing pump is mainly designed for laboratory use and delivers flow rates of up to 1500 ml/min/channel.
This dispensing pump has a user friendly 128x64 graphic LCD that displays running menus and parameters setting menus with several control modes.
External control is possible with a standard external control interface or a RS485 communication interface.
Specifications
- Speed: 1 to 300 rpm, reversible
- Speed resolution: 1 rpm.
- Control model: Rotary encoded switch with membrane keypad, supports external signal control and communication control
- Display: LCD displays running parameters
- Dispensing volume: 0.1 ml to 99.9 litres
- Dispensing volume calibration: Calibrate dispensing volume to increase accuracy
- Copy number: 1 to 999, "0" means unlimited cycle
- Pause time: 1 sec. to 999 sec., resolution is 1 sec.
- Back suction angle: 0 to 360°, resolution is 18°
- External control: Start/stop, direction and speed control (0-5V, 0-10V, 4-20 mA, 0-10 kHz external control module optional)
- Speed signal output: 0-5V corresponding to 1-300 rpm.
- Start/stop signal output: OC gate signal output
- Direction signal output: OC gate signal output
- Communication: RS485
- Memory function: Storing the running parameter automatically
- Prime key: For fast filling and emptying
- Power supply: AC 220V +10%/50W or AC 110V +10%/50W
- Operating temperature: 0-40°C
- Relative humidity: <80%
- IP31
Functions and features
- Set pause time to allow for automatic dispensing and filling
- Display can switch between flow rates and rpm
- Calibration function to acquire more accurate flow rates
- RS485 communication interface available. Offering communication protocol to the customer and customising software according to customer's requirements.
Operating Manual
- Supplied with English operating manual
Parameters
| Drive | Pump head | Tubing size (#) | Flow rate (ml/min/channel) at 1 - 300 rpm (measured with water) | Weight (kg) |
| LP-BT300-1F | LP-YZ1515X, LP-YZII15 (3 rollers) | 13 | 0.063 - 19 | 4.7 |
| 14 | 0.25 - 75 | |||
| 19 | 0.42 - 125 | |||
| 16 | 0.77 - 230 | |||
| 25 | 1.6 - 480 | |||
| 17 | 2.6 - 800 | |||
| 18 | 3.6 - 1100 | |||
|
LP-YZ2515X, LP-YZII25 (3 rollers) |
15 | 1.6 - 480 | ||
| 24 | 2.6 - 800 | |||
| YZII25 (3 rollers) | 35 | 3.6 - 1100 | ||
| 36 | 5.0 - 1500 | |||
| DMD15-13-B | 13 | 0.13 - 40 | 4.7 | |
| 14 | 0.5 - 150 | |||
| 19 | 1.03 - 310 | |||
| 16 | 1.6 - 480 | |||
| 25 | 3.5 - 1035 | |||
| DG15-24 (2 channels, 4 rollers) | 16 | 0.82 - 245 | 5.1 | |
| 25 | 1.92 - 575 | |||
| 17 | 3.0 - 900 | |||
Pump head material
- PESU (Polysulphone material) is white, has good rigidity and high precision. It is usually used in research laboratories and supporting analytical devices. The PESU material can resist temperatures from -100℃ to 150℃ and can resist corrosion from most inorganic acid, base and salt.
- PPS (Poyphenylene sulfide material) is black and can resist organic solvent corrosion. It is suitable for industrial use and bad working conditions. It has high rigidity and precision. The PPS material can resist temperatures of 200 ℃.
VIDEOS
Dispensing Function on the the LP-BT300-1F Dispensing Pump
Back Suction Demo
Calibration Demo
| Weight | 4.3 kg |
| CE marking | Yes |
| IP-Rating | IP31 |
| Speed | 1-300 rpm |
| Flow rate | 0.07-1500 ml/min |
| Power supply | AC 220V +/-10% / 50W |
| Operating Temperature | 0-40°C |
| Relative humidity | < 80% |
| Size (Length) | 202 mm |
| Size (Height) | 160 mm |
| Size (Width) | 239 mm |
| Caption | Representative image only |
| Title | Type | Size | Download |
|---|---|---|---|
| BT300-1F-Operating-Manual.pdf | 265.74KB | Download |
