dPOFLEX BP01 Peristaltic pump

Representative image only

dPOFLEX BP01 Peristaltic pump

Price from EUR 6,936.90

(excl. VAT)

The BP01 peristaltic pump is a high flow rate industrial peristaltic pump from Longer and part of its dPOFLEX series. It is primarily designed for the biopharmaceutical sector however, it can be used within a wide range of industrial applications.
The pump can deliver flow rates between 1.1 ml/min and 17.0 l/min and dose between 1.0 ml and 274.9 liters. It has a 304 stainless steel housing, a 4.3 LCD screen and it can be controlled via its membrane keyboard or by an external signal. Due to a high IP protection rating (IP66), the pump is suitable for operation in dusty and humid industrial environments.

 

Read more
dPOFLEX BP01 Peristaltic pump
Items
 
Price
Note
Quantity
  • Type: with GPH01pump head with 2 rollers

    Model/Product no.: LP-BP01/GPH01

    EUR 6,936.90

    (excl. VAT)

    in stock

    Weight: 21 kg

  • Type: with GPH02 pump head with 2 rollers

    Model/Product no.: LP-BP01/GPH02

    EUR 6,936.90

    (excl. VAT)

    approx. 3 weeks delivery

    Weight: 21 kg

  • Type: with GPH03 pump head with 4 rollers

    Model/Product no.: LP-BP01/GPH03

    EUR 6,936.90

    (excl. VAT)

    approx. 3 weeks delivery

    Weight: 22 kg

  • Type: with LPH01 Low-pulsation pump head

    Model/Product no.: LP-BP01/LPH01

    EUR 8,093.10

    (excl. VAT)

    approx. 3 weeks delivery

    Weight: 21 kg

Industrial High Flow Rate Peristaltic Process pump for Bio-pharmaceutial and Industrial Applications

The BP01 peristaltic pump is a high flow rate industrial peristaltic pump from Longer and part of its dPOFLEX series. The pump is primarily designed for the biopharmaceutical sector, but it can be used in a wide range of industrial applications.
It has a 304 stainless steel housing and a high protection rating (IP66), which makes it suitable for operation in dusty and humid industrial environments.
The pump meets 21CFR Part 11 and GMP laboratory requirements and to achieve preventive maintenance, it is possible to integrate several types of sensors, as for example: a liquid leakage sensor, an open head sensor, a flow rate sensor and a pressure sensor.
It can deliver flow rates between 1.1 ml/min and 17.0 l/min and its dosing volume lies between 1.0 ml and 274.9 liters, depending on which pump head and tubing it is equipped with.
The BP01 peristaltic pump comes with a 4.3 LCD screen that shows the menu and operating parameters, which can then be adjusted via the membrane keyboard or by an external signal.

Technical data for the dPOFLEX BP01 Peristaltic Pump

Pump drive model dPOFLEX0 BP01
Housing material 304 stainless steel
Speed range 0,1 rpm - 265 rpm, CW/CCW
Speed resolution 0.1 rpm
Display 4.3" LCD
Clock function Year/month/day/hour/minute can be set.
Hours and minutes are displayed on the running screen.
Work mode Flow rate mode, dispensing mode, calibration mode
Flow rate mode The pump runs continuously at the set flow rate. It displays the flow rate and pump speed on the screen.
Flow rate setting range 1.1ml/min - 17.0L/min(depending on the pump head and tubing size/material)
Dispensing mode The pump repeats the dispensing at a set volume, cycles and interval time.
It displays the single volume, dispensed volume and dispensed cycles/target cycles on the screen.
Volume of a single dose 1.0 ml - 274.9 liters depending on the pump head and tubing size/material)
Dispensing cycles 1-9999 (0 for unlimited)
Interval time 5 sec. to 9999 sec.
Calibration function Improves the flow rate and dispensing volume accuracy.
Control mode Keypad control, external signal control and communication control.
Communication control

RS485 that support Modbus RTU mode - standard
TCP/IP interface for Industrial Ethernet (optional, has to be ordered with the pump)
Profibus DP (optional, profibus module can be ordered)

External control Speed control: 0-10V, 4-20mA
Start/stop, direction control: 5V-24V logic level signal or relay signal (dry contact)
Status output Pump Speed: 0-10V, 4-20mA
Running/stopped, direction, tubing leakeage alarm: relay signal (dry contact)
Open-head sensor The pump will stop when the pump head is open for enhanced user safety.
Status when powered up Stopped
Keypad lock function Enable the keypad lock function to lock the keypad automatically after 20 sec. standby.
(The start/stop button will not be locked)
Tubing leak detection Detects if there is a tubing leak and gives an alarm (optional, leak sensor can be ordrered)
Flow rate measurement Measures the flow rate by connecting flow meter (optional, can be ordered)
User access control Three levels of user access (administrator, technician, operator)
Electronic signature and audit trail Meet the requirement of FDA 21CFR Part 11
Log record Record 90 days operation history, which can be exported directly.
Support IQ/OQ Meet GMP requirement
Certificates EN 61010-1:2010, EN IEC 61010-2-201
EMC: EN IEC61000-6-2, EN IEC 61000-6-4
Dimensions (L x W x H) 260 x 407 x 290 mm
Power supply AC100-240V 50/60Hz
Operating condition Temperature: 5℃-40℃
Relative humidity ≤100%
IP-rating IP66
Weight (drive only) ≤16.6kg

 


Pump heads and compatible tubing sizes 

Pump model Pump head Number of rollers Tubing size # Tubing dimensions
Inner diameter x wall thickness (mm)
Reference max. flow rate (l/min) 
(meassured with water)
dPOFLEX BP01 GPH01
(die-cast aluminum housing with 304ss rollers)
 
2 26 6.4 x 3.2 3,0
73 9.5 x 3.3 6,0
82 12.7 x 3.3 10,5
184 15.9 x 3.2 15
GPH02
(die-cast aluminum housing with 304ss rollers)
2 186 12 x 4 9,5
188 17 x 4 17
GPH03
(die-cast aluminumhousing with 304ss rollers)
4 186 12 x 4 8,5
188 17 x 4 14
LPH01
low pulsation
(anodized aluminum housing with 304ss rollers)
6 185 8 x 4 4.5 (double tube assembly)
186 12 x 4 9 (double tube assembly)
187 16 x 4 13.5 (double tube assembly)

 

Videos

Introduction to the dPOFLEX peristaltic pump

 

Introduction to the user interface on the dPOFLEX BP01 Peristaltic pump

Setting the access control on the dPOFLEX BP01 Peristaltic pump

Setting the flow rate on the dPOFLEX BP01 industrial Peristaltic pump

Calibrating the dPOFLEX BP01 industrial peristaltic pump

Installing tubing with connectors in the GPH pump head on the dPOFLEX BP01 peristaltic pump

Setting the parameters for external control on the dPOFLEX BP01 industrial peristaltic pump

Setting the external communication control on the dPOFLEX BP01 industrial peristaltic pump

Installing a flow sensor on the dPOFLEX BP01 industrial peristaltic pump (can be purchased separately)

Liquid leakage sensor on the dPOFLEX BP01 peristaltic pump (can be purchased separately)

Weight 21 kg
Material 304 stainless steel
CE marking Yes
IP-Rating IP66
Speed 0,1 - 265 rpm
Flow rate 1.1 - 17000 ml/min
Power supply AC100-240V 50/60Hz
Operating Temperature 0-40°C
Relative humidity <100 %
Caption Representative image only

Category: Accessories

Items
Price
Note
Quantity