Representative image only

dPOFLEX PFU peristaltic filling system

Price from EUR 7,399.40 ~~EUR 9,249.20~~

(excl. VAT)

The dPOFLEX PFU peristaltic filling pump system is a high precision dosing system.
You can use the pump head PFH01 for filling micro-volumes or the PFH02 pump head for mililiter volumes.
The dPOFLEX PFU filling system complies with 21CFR Part 11 and GMP.
Suitable for silicone tubings.
It is possible to connect up to 32 channels to one PFC controller.

dPOFLEX PFU peristaltic filling system

Items

Price

Note

Quantity

Type: with PFH01 pump head with 12 rollers

Model/Product no.: PFU/DPOPFLEX-PFH01

EUR 8,902.40

(excl. VAT)

approx. 4 weeks delivery

Weight: 4.7 kg
Type: with PFH02 pump head with 8 rollers

Model/Product no.: PFU/DPOPFLEX-PFH02

EUR 7,399.40 ~~EUR 9,249.20~~

(excl. VAT)

in stock

Weight: 5 kg

Low Flow Rate Peristaltic Filling System with High Precision

The dPOFLEX PFU is a high precision peristaltic filling system for flow rates between 0.01 and 1,178 ml/min.

You can use the pump head PFH01 for filling micro-volumes between 30 and 2000 μl (2 ml) per second. The PFH02 pump head is for volumes between 0.2 and 16 ml per second.

The pump head has an anodised aluminum housing which has good corrosion resistance. It has a phase compensation structure for dosing with low pulsation. If you have a liquid that you need to transfer with low pulsation, fx to avoid foaming, then the phase compensation structure of the PFH pump head is perfect for you.

You avoid the risk of product cross-contamination with the Longer dPOFLEX filling units as your liquid only is in contact with the inner wall of the single-use silicone tubing sets that are used with this Longer filling system.

The PFC controller with touch screen makes it easy to control your filling processes and you can save your settings. The PFC controller is needed to control the dPOFLEX PFU filling system with one to 32 channels, and each channel can be controlled individually.

You can export batch reports, operations logs and have 3 levels of user access and electronic signature. The special features of the dPOFLEX PFU filling system makes it compliant with 21CFR Part 11 and GMP.

You have to order the tubing set for the pump head as an accessory.

Technical specifications for dPOFLEX PFU dosing system

Pump head: PFH01 (microliter pump head) or PFH02 (milliliter pump head)
Suitable tubings: Silicone tubing and tubing kits
Filling volume: 1 μL-99.99 L
Filling accuracy: better than ±1%
Filling time: 0.1 seconds-999.9 hours
Filling cycle: 0-999999 (0 means unlimited)
Interval time: 0.1 s-999.9 s
Back suction is possible
Working direction: Clockwise
Calibration: Manual input calibration, balance reading calibration or online ratio calibration, with volume or mass data
Display: 7 inch touch screen
Work mode: Single channel filling, multi-channel filling with the same parameters or individual parameters
Access management and password protection: Three levels of user accesses (administrator, developer, operator). Each user can have an exclusive password
Parameter settings: Up to 500 settings (dose volume, time and number of dosings) can be stored and recalled easily on the PFC controller
Batch report: Up to 800 batch reports can be stored on the PFC controller. They can be saved to USB flash drive or printed directly
Communication control: RS485 interface, Modbus RTU protocol
External control input: Start the pump, emergency stop, disable channel
Output: 1 output for malfunction status. Choose the alarm to be either for blockage or for hardware failure.
Power supply: AC 100V-240V, 50/60Hz, 60W
Dimensions (LxWxH): 119 mm x 203 mm x 176 mm (without pump head）
Weight of system: 3.5kg (without pump head）
Dimension of controller (LxWxH): 187 mm x 123 mm x 39 mm
Weight of controller: 0.6 kg
Working condition: Temperature: 5 - 40°C, RH: ≤85%, no condensation
Storage and transportation condition: Temperature: -40-70°C, RH: ≤85%, no condensation
IP rating: IP31

Manual

The manual is in english.

Pump heads and compatible tubing sizes

Pump model	Pump head	Number of rollers	Speed (rpm)	Tubing ID (mm)	Max. flow rate (ml/min)	Recommended filling volume (Accuracy < +1%) (meassured with water)	Max. filling volume per second	Recommended filling nozzle ID (mm)
dPOFLEX PFU	PFH01 (for micro liters)	12	<350	0.5	7	30 μl	118 μl	0.3 or 0.6
				0.8	17	42 μl	269 μl	0.6
				1.2	34	90 μl	534 μl	1
				1.6	63	132 μl	987 μl	1 or 0.6
				2.4	104	400 μl	1.61 ml	1.6
				3.2	159	760 μl	2.47 ml	1.6 or 3.2
	PFH02 (for mililiters)	8	<450	0.6	27	0.2 ml	0.42 ml	0.6
				0.8	66	0.4 ml	1.03 ml	0.6
				1.2	114	0.5 ml	1.78 ml	1
				1.6	147	0.8 ml	2.29 ml	1 or 1.6
				2.4	371	1.16 ml	5.77 ml	1.6
				3.2	566	2.15 ml	8.80 ml	1.6 or 3.2
				4.8	1178	3 ml	16 ml	3.2 or 4.5

Videos

Each channel can run with individual parameters in the dPOFLEX PFU multichannel filling system

Filling volume calibration of dPOFLEX PFU and PFS filling system

How to create a new user on dPOFLEX PFC Peristaltic Pump controller

Export the batch report and log the record from the dPOFLEX PFC controller

Connect multiple units to the dPOFLEX PFC controller