Low Flow Rate Peristaltic Pump with timer, keypad lock and calibration function
L100-1S-2 is a peristaltic flow rate pump, primarily designed for laboratory and light industry applications.
It has a simple timer function, where time can be set between 0-30 minutes and calibration function that can increase accuracy.
The pump has a clear LCD screen for displaying and setting operating parameters as well as keypad lock to avoid misoperation.
The speed can be adjusted in rpm and the flow rate in µl/min or ml/min.
The pump can be controlled using the membrane keypad or with an external control signal.
The L100-1S-2 pump has intelligent fan control, which ensures a lower noise level and better energy efficiency.
This pump is only suitable for the soft silicone tubings.
Specifications
- Flow rate: 0,00015 - 500 ml/min.
- Speed: 0.1 - 100 rpm, CW/CCW
- Speed resolution: "0.01 rpm resolution within the speed of 0.01 rpm - 10 rpm, 0.1rpm resolution within the speed of 10rpm-100rpm"
- Display: LCD
- Control mode: Keypad control, external signal control and communication control
- Work mode: Speed control mode and flow rate mode
- Flow rate mode: Flow rate is displayed and the pump runs continuously at the set flow rate
- Flow rate calibration: Improve the flow rate accuracy
- Flow rate setting range: 0.01 µl/min - 999 l/min, the unit can be set as µl/min or ml/min
- External control: Start/stop control (switch signal), direction control (switch signal), speed control (0-5V, 0-10V, 4-20mA, 0-10kHz are optional with uniform interface, from 0-10 rpm in 0.01 rpm resolution, from 10-100 rpm in 0.1 rpm resolution)
- Communication control: RS485 interface, Longer protocol or Modbus protocol, the communication parameters (address, baud rate, parity, stop bit) can be set through keypad.
- Timing function: Set the running time (0-30 min), the pump could run/stop automatically
- Parameter memory: Operating parameters will be saved automatically.
- Pump status when powered up: The pump status when powered up could be set as stop or as the status before power loss.
- Prime: Fast filling or emptying at full speed
- Keypad lock function: Keypad can be locked to prevent misoperation.
- Dimensions (LxWxH): 232x142x149 (mm)
- Power supply: AC100V~240V/25W，50/60Hz
- Operating temperature: 0℃~40℃
- Relative humidity: <80%
- IP rating: IP31
- Weight: 2.38kg
Operating Manual
- Supplied with English operating manual
Technical Specifications
| Pump drive | Pump head | Tubing size # | Tubing Dimensions IDxWT (mm) |
Flow rate (ml/min/channel) at 0.01 - 100 rpm (measured with water) |
| L100-1S-2 | YZ1515x or YZII15 3 rollers |
13 | 0.8 x 1.6 | 0.0006 - 6.3 |
| 14 | 1.6 x 1.6 | 0.0025 - 25 | ||
| 19 | 2.4 x 1.6 | 0.0042 - 41.66 | ||
| 16 | 3.2 x 1.6 | 0.0077 - 77.7 | ||
| 25 | 4.8 x 1.6 | 0.016 - 160 | ||
| 17 | 6.4 x 1.6 | 0.026 - 260 | ||
| 18 | 7.9 x 1.6 | 0.036 - 366 | ||
| YZ2515X or YZII25 3 rollers |
15 | 4.8 x 2.4 | 0.016 - 160 | |
| 24 | 6.4 x 2.4 | 0.026 - 266 | ||
| YZII25 3 rollers |
35 | 7.9 x 2.4 | 0.037 - 367 | |
| 36 | 9.6 x 2.4 | 0.05 - 500 | ||
| FG15-13 3 rollers |
13 | 0.8 x 1.6 | 0.0005 - 5.3 | |
| 14 | 1.6 x 1.6 | 0.003 - 30 | ||
| 19 | 2.4 x 1.6 | 0.006 - 61.67 | ||
| 16 | 3.2 x 1.6 | 0.011 - 106.67 | ||
| 25 | 4.8 x 1.6 | 0.023 - 230 | ||
| 17 | 6.4 x 1.6 | 0.036 - 360 | ||
| 18 | 7.9 x 1.6 | 0.04 - 400 | ||
| FG25-13 3 rollers |
15 | 4.8 x 2.4 | 0.022 - 223 | |
| 24 | 6.4 x 2.4 | 0.037 - 366 | ||
| DG15-24 2 channels, 4 rollers |
16, 25, 17 | 0.0008 - 300 | ||
| DG15-28 2 channels, 8 rollers |
Inner diameter (ID) 0.13 - 3.17 mm Wall thickness (WT): 0.8 - 1.0 mm Tubing with stops |
0.0003 - 75 | ||
| DG-1, 2, 4, 6 or 8 (6) 1-8 channels with 6 rollers |
Inner diameter (ID) 0.13 - 3.17 mm Wall thickness (WT): 0.8 - 1.0 mm Tubing with stops |
0.0002 - 48 | ||
| DG-1, 2 or 4 (10) 1-4 channels with 10 rollers |
Inner diameter (ID) 0.13 - 3.17 mm Wall thickness (WT): 0.8 - 1.0 mm Tubing with stops |
0.00015 - 32 | ||
| DMD15-13-B 2*3 rollers offset for low pulsation flow |
2*13, 2*14, 2*19, 2*16, 2*25 | 0.002 - 375 |
Videos
| Weight | 2.38 kg |
| CE marking | Yes |
| IP-Rating | IP31 |
| Power supply | AC110-240V/20W, 50/60Hz |
| Operating Temperature | 0-40°C |
| Relative humidity | < 80% |
| Size (Length) | 232 mm |
| Size (Height) | 149 mm |
| Size (Width) | 142 mm |
| Caption | Representative image only |
| Title | Type | Size | Download |
|---|---|---|---|
| L100-1S-2-Peristaltic-Flow-Rate-Pump-Datasheet-2023---DRIFTON.pdf | 2.12MB | Download | |
| L100-1S-1-L100-1S-2-Operating-Manual.pdf | 2.38MB | Download |
