LabN1 Peristaltic Flow Rate Pump with timer function for simple dispensing
The LabN1 is a peristaltic flow rate pump with ABS plastic housing. It has a timer function that can be used for simple dispensing. The pump is particularly suitable for university and research laboratories where simple dispensing is needed. You have the possibility to adjust the speed range from 0.1 to 150 rpm and the flow rate can be set between 0.000166 and 570 ml / min / channel. The LCD display gives you an overview of current dispensing values and there is a timer function for the dosing. With various pump head possibilities you can adjust the pump to suit your particular needs. LabN1 has low vibrations and low noise.
You can set the flow rate in ml/min and the speed in rpm on the LabN1 peristaltic pump.
The LabN1 peristaltic pump comes in 3 different versions, which have different motors; LabN1, LabN1-II and LabN1-III.
Technical Specifications
- Flow rate range: 0.000166-570 ml/min/channel
- Speed range: 0.1-150 rpm
- Speed resolution: 0.1 rpm
- Flow rate accuracy: 0.5 ~ 1.0 %
- Back angle suction: 0-360°
- Outlet pressure:
- 0.8~1.0 mm wall thickness tubing: 0,1 Mpa (1 bar)
- 1.6~2.4 mm wall thickness tubing: 0.1~0.27 Mpa (1~2.7 bar)
- Display: 3,2" high definition LCD screen
- Dosing: Timer function for simple dispensing
- Control method: Turn button and mechanical keypad
- Speed control: Turn button
- External speed control signal: 0-5V, 0-10V, 4-20 mA
- Start/stop, direction signal: Passive switch signal, such as foot pedal. Active switch signal: 5V, 12V, 24V
- Communication interface: RS232, RS485 support, MODBUS protocol (RTU mode)
- Output interface: Output motor working status (open-collector output)
- Power supply: AC 220V +10% 50 Hz/60 Hz (standard), AC 110V + 10% 50 Hz/60 Hz (optional)
- Housing material: ABS plast
- Dive dimension: (LxWxH): 261.4x157.3x237 mm
- Power consumption: <50 W
- Condition temperature: 0-40°C
- Relative humidity: <80%
- IP rate: IP31
Operating Manual
- Supplied with English operating manual
Parameters
| Motor | Pump head | Tubing size (#) | ID x WT (mm) | Flow rate (ml/min/kanal) at 0.1 - 150 rpm (measured with water) |
| LabN1 | (-III) EasyPumpIII with 1 channel and 4 rollers (1 or 2 pcs.) |
13 | 0.8×1.6 | 0.0053-8,0 |
| 14 | 1.6×1.6 | 0.027~41 | ||
| 19 | 2.4×1.6 | 0.055~82,5 | ||
| 16 | 3.1×1.6 | 0.093~140 | ||
| 25 | 4.8×1.6 | 0.197~295 | ||
| 17 | 6.4×1.6 | 0.333~500 | ||
| 18 | 7.9×1.6 | 0.430~645 | ||
| (-III) EasyPumpIV with 1 channel and 4 rollers (1 or 2 pcs.) |
15 | 4.8×2.4 | 0.180~270 | |
| 24 | 6.4×2.4 | 0.273~410 | ||
| 35 | 7.9×2.4 | 0.383~575 | ||
| 36 | 9.6×2.4 | 0.517~775 | ||
| (-III) EasyPumpVI with 2 channel and 4 rollers (1 or 2 pcs.) |
13 |
0.8×1.6 | 0.0053~8.0 | |
| 14 | 1.6×1.6 | 0.027~41 | ||
| 19 | 2.4×1.6 | 0.055~82.5 | ||
| 16 | 3.1×1.6 | 0.093~140 | ||
| 25 | 4.8×1.6 | 0.197~295 | ||
| 1, 2, 3 ot 4 pcs. YZ1515X with 3 rollers |
13 | 0.8×1.6 | 0.007 - 10,5 | |
| 14 | 1.6×1.6 | 0.027 - 40.5 | ||
| 19 | 2.4×1.6 | 0.055 - 82.5 | ||
| 16 | 3.1×1.6 | 0.082 - 123 | ||
| 25 | 4.8×1.6 | 0.17 - 255 | ||
| 17 | 6.4×1.6 | 0.29 - 435 | ||
| 18 | 7.9×1.6 | 0.38 - 570 | ||
| 1or 2 pcs. YZ2515X (3 rollers) | 15 | 4.8×2.4 | 0.17 - 255 | |
| 24 | 6.4×2.4 | 0.29 - 435 | ||
| AMC1 - AMC12(6) (1-12 channels with 6 rollers) |
ID: 0,13-3,00 mm Wall thickness: 0,8-1 mm |
ID: 0,13-3,00 mm WT: 0,8-1 mm |
0.0002 - 65.17 (See more flow rates under AMC pump head here) | |
| AMC1 - AMC12(10) (1-12 channels with 10 rollers) |
ID: 0,13-3,00 mm Wall thickness 0,8-1 mm |
ID: 0,13-3,00 mm WT: 0,8-1 mm |
0.0002 - 48.38 (See more flow rates under AMC pump head here) | |
| MC1-MC8 (6 rollers) | ID: 0,13-3,17 Wall thickness: 0,8-1 mm |
ID: 0,13-3,17 WT: 0,8-1 mm |
0,000185~65 (see more flow rates for the MC pump head here) | |
| MC1-MC8 (10 rollers) | ID: 0,13-3,17 Wall thickness: 0,8-1 mm |
Indre diameter: 0,13-3,17 WT: 0,8-1 mm |
0,0000166~49 (see more flow rates for the MC pump head here) |
Pump Head Materials (YZ1515x and YZ2515x)
- PSF (Polysulphone material) is white, has good rigidity and high precision. It is usually used in research laboratories and supporting analytical devices. The PSF material can resist temperatures from -100 ℃ to 150 ℃ and can resist corrosion from most inorganic acid, base and salt.
- PPS (Poyphenylene sulfide material) is black and can resist organic solvent corrosion. It is suitable for industrial use and bad working conditions. It has high rigidity and precision. The PPS material can resist temperatures of 200 ℃
Video
How to calibrate the LabN1-III peristaltic pump
How to use the timer dispensing function on the LabN1-III peristaltic pump
Full speed and reverse fuction on the LabN1-III peristaltic pump
How to set the pump head and tubing size on the LabN1-III peristaltic pump
How to adjust the flow rate on the LabN1-III peristaltic pump while transferring
Shenchen AMC series Pump head
| Weight | 4.40 kg |
| Material | ABS plastic housing |
| CE marking | Yes |
| IP-Rating | IP31 |
| Speed | 0.1 - 150 rpm |
| Flow rate | 0.0046 ml/min - 570 ml/min/channel |
| Power supply | AC220V +10%, 50Hz/60Hz (standard) |
| Operating Temperature | 0-40°C |
| Relative humidity | < 80% |
| Size (Length) | 261.4 mm |
| Size (Height) | 237 mm |
| Size (Width) | 261.4 mm |
| Caption | Representative image only |
| Title | Type | Size | Download |
|---|---|---|---|
| LabN-Series-Manual_2020.pdf | 1.10MB | Download | |
| AMC-series-Pump-Head-Manual-10.26---2022.pdf | 949.40KB | Download | |
| LABN-EasyPump-Peristaltic-Pump-2022.pdf | 1.60MB | Download | |
| LABN1-AMC-Peristaltic-Pump-2022.pdf | 1.42MB | Download | |
| LabN-III-Peristaltic-Pump.pdf | 1.60MB | Download | |
| LABN-III-EasyPump-Peristaltic-Pump-2022.pdf | 1.60MB | Download | |
| LabN1--Basic-Peristaltic-Pump-2023-Drifton.pdf | 544.09KB | Download |
